Berg’s line of fiberglass industrial cooling towers are manufactured of extra thick fiberglass and premium quality components to provide years of trouble-free, low maintenance performance.
They feature a host of standard features and are supplied fully assembled on a structural steel integral base for easier installation and hook-up.
With a reliable and cost-effective design, the Berg Fiberglass Cooling tower is the machine of choice across a wide range of industries around the world.
“Industrial” dictates ruggedness. The Berg Tower is extremely rugged and the weight alone (amount of material that is used to make the unit) is a logical clue to that. The additional material in the Berg Towers consists of the thickness of the fibreglass ¼”, stainless steel supports inside the shell, and the steel base the unit sits on. All this is the recipe for longevity.
The Berg Units will be around 7500 lbs (operating), 4000 lbs (shipping -- ships in 2 pieces).
SPECIFICATIONS PER (1) ONE TOWER : Model BT-9636-7-1/2
| COOLING TOWER – Induced Draft | 106 ton |
|---|---|
| Cooling Capacity each | 318 USGpm , 95F in/85F out @ 78F wetbulb |
| Electrical (V/Ph/Hz) | 575V/3/60 |
| Weight each | 7,400 lbs operating / 3,400 lbs shipping |
| Fan Motor each | 7-1/2 hp , 1800 rpm, TEAO |
| Tower Dimensions each | 96” x 96” x 12’H |
| Ladder | Extra $ 850.00 |
| Water Connections | 4” Top Side Inlet / 6” Bottom Outlet |
SPECIFICATIONS PER (1) ONE TOWER : Model BT-9636-10
| COOLING TOWER – Induced Draft | 137 ton |
|---|---|
| Cooling Capacity each | 411 USGpm , 95F in/85F out @ 78F wetbulb |
| Electrical (V/Ph/Hz) | 575V/3/60 |
| Weight each | 7,500 lbs operating / 3,500 lbs shipping |
| Fan Motor each | 10 hp , 1800 rpm, TEAO |
| Tower Dimensions each | 96” x 96” x 12’H |
| Ladder | Extra $ 850.00 |
| Water Connections | 4” Top Side Inlet / 6” Bottom Outlet |
SPECIFICATIONS PER (1) ONE TOWER : Model BT-9636-15
| COOLING TOWER – Induced Draft | 150 ton |
|---|---|
| Cooling Capacity each | 450 USGpm , 95F in/85F out @ 78F wetbulb |
| Electrical (V/Ph/Hz) | 575V/3/60 |
| Weight each | 7,500 lbs operating / 4,000 lbs shipping |
| Fan Motor each | 15 hp , 1800 rpm, TEAO |
| Tower Dimensions each | 96” x 96” x 12’H |
| Ladder | Extra $ 850.00 |
| Water Connections | 4” Top Side Inlet / 6” Bottom Outlet |
| 4 Walkway (Full Perimeter Walkway) Stand (12ft high) with caged access ladder | Single walkway (1 side only walkway) Stand (12 ft high*) with Caged access ladder | For the Stand (12 ft high*) (no ladder/walkway/railings) |
|---|---|---|
| Freight available (for an additional cost) | Freight available (for an additional cost) | Freight available (for an additional cost) |
| Stand ships disassembled with all fastening hardware in crated boxes (see pics below). Assembly on site not included. | Stand ships disassembled with all fastening hardware in crated boxes (see pics below). Assembly on site not included. | Stand ships disassembled with all fastening hardware in crated boxes (see pics below). Assembly on site not included. |
| Requires proper foundation (either full concrete pad or 16” diameter concrete piers to below frost line and engineered for site conditions by others). | Requires proper foundation (either full concrete pad or 16” diameter concrete piers to below frost line and engineered for site conditions by others). | Requires proper foundation (either full concrete pad or 16” diameter concrete piers to below frost line and engineered for site conditions by others). |
| 12 ft high stand assumes ground levels are the same between the plant and stand location for a 5 ft high tank inside (see below diagram) | *12 ft high stand for ground levels that are the same between the plant and stand location, for a 5 ft high tank inside (see below diagram) | *12 ft high stand for ground levels that are the same between the plant and stand location, for a 5 ft high tank inside (see below diagram) |
Find out how Berg’s cooling towers can help your company’s production process. Contact a Berg representative today.
